Featured
-
Super Lowest Price Cartridge Heater With Thermocouple - Air Header Distribution Manifolds –
Product Description JELOK Series air header distribution manifolds are designed to distribute air from the compressor to the actuators on pneumatic instruments, such as steam flow meters, pressure controllers and valve positioners. These manifolds are widely used in industrial chemical processing, plastic processing and energy industries and are approved for low-pressure applications up to 1000 psi (threaded end connections). Manufactured from 304/316L stainless steel the air header dist... -
Discountable price Stainless Valves - JNV-100 Stainless Steel Male Needle Valve –
Product Description JNV-101 series needle valves have been well accepted and widely used in a variety of industries for many years. Working pressure is up to 10000 psig (689 bar), working temperature is from -65℉ to 1200℉ (-53℃ to 648℃). Needle valves provide reliable flow control for a range of applications using a variety of stem designs, flow patterns, materials, and end connections in designs such as integral-bonnet and union-bonnet. Metering valves provide the ability to make fine a... -
Popular Design for 3 Way L Port Ball Valve - JELOK 5-Way Valve Manifolds for Pressure Transmitterr –
Product Description JELOK 5-valve manifolds are designed for differential pressure applications. 5-valve manifolds consist of high-pressure valve, low pressure valve, balance valve and two check (blowdown) valves. 5-valve manifolds are used for all kinds of imported instruments, and it is installed with all kinds of differential pressure, flow, liquid level and other transmissions. When working, close the two groups of checking valves and balance valves. If inspection is needed, just cut... -
OEM Factory for Mechanical Turbine Flow Meter - JEF-500 Series Turbine Folwmeter –
Product Description The deflector cones eliminate downstream thrust on the rotor and allow for hydrodynamic positioning of the rotor between deflector cones. The hydrodynamic positioning of the low mass rotor provides wider rangeability and longer bearing life than that of conventional turbine flowmeters. Integral flow straightening tubes minimize the effects of upstream flow turbulence. The housing is made of non-magnetic materials. The rotor is made of magnetic or magnetized material. ... -
2022 wholesale price Ptfe Anticorrosive Thermocouple - JBBV-103 Block and Bleed Monoflange Valve –
Block & Bleed Monoflange The Block and Bleed Monoflange represents a true technical and economical innovation. Differently from the old system composed by big size block valves, safety and on-off valves, draining and sampling, these monoflanges allow to reduce costs and spaces. The monoflanges can be realized in traditional AISI 316 L as standard or exotic materials when required. They have compact dimensions with consequent reduction of assembling costs. Product Details ... -
Reasonable price for 3 Pvc Ball Valve - JELOK Double Ferrule Tube Fittings –
Product Description JELOK continues to improve the performance and reliability of the tube fitting for use in thousands of diverse applications—including research, alternative fuels, analytical and process instrumentation, oil and gas, power, petrochemical, and semiconductor industries. JELOK can design and manufacture special fittings to the specific customer requirements and process conditions. JELOK fittings materials include stainless steel, alloy 400/R-405, brass, and carbon steel. ... -
Leading Manufacturer for Solenoid Operated Ball Valve - JELOK 3-Way Valve Manifolds for Pressure Transmitterr –
Product Description JELOK 3-valve manifolds are designed for differential pressure applications. 3-valve manifolds are composed of three interrelated three valves. According to the function of each valve in the system, it can be divided into: high pressure valve on the left, low pressure valve on the right, and balance valve in the middle. 3 valve manifolds are used with differential pressure transmitter to connect or disconnect the positive and negative pressure measuring chamber from t... -
OEM/ODM Factory Ball Stop Valve - JELOK 2-Way Valve Manifolds for Pressure Gauge Transmitter –
Product Description JELOK 2-valve manifolds are designed for static pressure and liquid level applications.Its function is to connect pressure gauge with the pressure point. It is generally used in field control instruments to provide multi-channel for instruments, reduce installation work and improve system reliability. ● Working pressures: Stainless steel up to 6000 psig (413 bar) Alloy C-276 up to 6000 psig (413 bar) Alloy 400 up to 5000 psig (345 bar) ● Working temperatures: PTFE pac... -
professional factory for Pp Ball Valve Flange End - Condensate Chambers & Seal Pots –
Product Description The bottom connection is used as a drain port to remove condensate. Condensate chambers can also be used to cool very high-temperature liquids. The primary use of condensate pots is to increase the accuracy of flow measurement in steam pipelines. They provide an interface between the vapor phase and the condensed phase in the impulse lines. Condensate Pots are used to collect and accumulate condensate and extrinsic particles. Condensate chambers aid in protecting deli... -
Chinese Professional Stainless Steel Braided Hose Fittings - JBV-100 Ball Valve for Pressure Pipe –
Product Description ● Structure: Ball ● Pressure: High Pressure ● Power: Manual, Hydraulic ● Material: Stainless Steel, SS304, SS316, SS304L, SS316L ● Temperature of Media: -65°F to 450°F (-54℃ to 232℃) ● Media: Water, Gas, Oil, etc. ● Port Size: 1/8″ to 1″ ● Application: General ● Working pressure: up to 15000psi Features ● Leak-proof connection ● Easy to install ● Excellent vacuum and pressure ratings ● Interchangeable & re-tighten ● High strength ● Corrosion resis... -
Low price for 22mm Stainless Steel Pipe - JBBV-101 Single Block and Bleed Valve –
Overview Block & Bleed Monoflange Valve The Block and Bleed Monoflange represents a true technical and economical innovation. Differently from the old system composed by big size block valves, safety and on-off valves, draining and sampling, these monoflanges allow to reduce costs and spaces. Monoflange is designed to replace conventional multiple-valve installations currently in use for interface with pressure measuring systems in process control applications. The monoflanges can b... -
Hot Sale for Ball Cone Check Valve - JELOK Double Ferrule Tube Fittings –
Product Description JELOK continues to improve the performance and reliability of the tube fitting for use in thousands of diverse applications—including research, alternative fuels, analytical and process instrumentation, oil and gas, power, petrochemical, and semiconductor industries. JELOK can design and manufacture special fittings to the specific customer requirements and process conditions. JELOK fittings materials include stainless steel, alloy 400/R-405, brass, and carbon steel. ...
