OEM Supply Wireless Pressure Transmitter - JEP-100 Series Pressure Transmitter –
OEM Supply Wireless Pressure Transmitter - JEP-100 Series Pressure Transmitter – Detail:
Product Description
Industrial pressure transmitters for the process pressure measure, monitor and control application.
The JEP-100 series pressure transmitter uses a single crystal silicon pressure sensitive chip, after a high-reliability amplifying circuit and precise temperature compensation, the pressure of the measured medium is converted into a standard electrical signal, and the value is displayed. High-quality sensors and a perfect assembly process ensure the excellent quality and performance of the product. The product has high precision and various parameters can be customized, which can meet the needs of customers to the greatest extent and is suitable for the supporting use of various measurement and control equipment.
Through connection to diaphragm seals, they are suitable for the harshest operating conditions. Ideal for OEMs, process applications, water processing, and industrial pressure applications.
Features Features
● Aluminum alloy/Stainless steel shell, threaded stainless steel structure
● Strong anti-interference, good long-term stability
● Easy to install
● Wide measuring range, a variety of sensors are available
● Higher accuracy, zero point, full range adjustable
● Product traceability
Product Details
Features Applications
✔ Hydraulic and pneumatic control system
✔ Petrochemical, environmental protection, air compression
✔ Light industry, machinery, metallurgy
✔ Industrial process detection and control
Specifications
Pressure Type |
Gauge pressure , Absolute pressure |
Medium |
Liquid , Gas |
Medium Temperature |
-40~80°C |
Measuring Range |
-0.1~0~60MPa |
Measuring Accuracy |
0.5% , 0.25% |
Response Time |
1ms(up to 90% FS) |
Overload Pressure |
150% FS |
Power Supply |
24V |
Output |
4-20Ma (HART); RS485; Modbus |
Shell Material |
Aluminum alloy / Stainless steel |
Diaphragm |
316L / Ti / Ta / Hastelloy C / Mondale |
Portfolio
▶ Gauge Pressure Transmitter
Gauge pressure (GP) transmitters compare process pressure with local ambient air pressure. They have ports for real-time sampling of ambient air pressure. Gauge Pressure plus atmospheric is the absolute pressure. These devices are designed to measure pressure relative to ambient atmospheric pressure. The output of the gauge pressure sensor will vary depending on the atmosphere or different altitudes. Measurements above ambient pressure are expressed as positive numbers. And negative numbers indicate measurements below ambient pressure. JEORO offers gauge pressure transmitters for a variety of industrial applications.
▶ Absolute Pressure Transmitter
Absolute pressure transmitters measure the difference between vacuum and measured pressure. The absolute pressure (AP) transmitter is a measure of the ideal (complete) vacuum. In contrast, the pressure measured relative to the atmosphere is called gauge pressure. All absolute pressure measurements are positive. The readings produced by absolute pressure sensors are not affected by the atmosphere.
▶ Hydrostatic Pressure Transmitter
Hydrostatic Pressure Transmitters is an instrument that measures the hydrostatic pressure or differential pressure exerted by a hydrostatic head installed on the pipeline or container.
1. Diffused silicon Pressure Transmitter
2. Capacitive Pressure Transmitter
3. Diaphragm Seal Pressure Transmitter
The diaphragm seal pressure transmitter is the flange type pressure transmitter. they are used when the process medium should not come into contact with the pressured parts by diaphragm seals.
▶ High-Temperature Pressure Transmitter
High-Temperature Pressure Transmitter works for gas or fluid up to 850 °C. It is possible to fit a standoff pipe, pigtail or another cooling device to reduce the media temperature. If not, High-Temperature Pressure Transmitter is the best choice. The pressure is transmitted to the sensor through the heat dissipation structure on the transmitter.
▶ Hygienic & Sanitary Pressure Transmitter
Hygienic & Sanitary Pressure Transmitter, also called tri-clamp pressure transmitter. It is the pressure transducer with the flush diaphragm (flat membrane) as the pressure sensor. The sanitary pressure transmitter is designed especially for the requirements of the food and beverage, pharmaceutical and biotechnology industries.
Configuration
Medium |
___________________________ | |||||||
Pressure Type |
□1 Gauge pressure | □2 Absolute pressure | ||||||
Measuring Range |
___________________________ | |||||||
Accuracy |
□ 0.5% | □ 0.25% | ||||||
Diaphragm Material |
□316L | □Ti | □Ta | □Hastelloy | □Mondale | |||
Connection Type |
□ G1/2 External thread | |||||||
□1/2NPT Inner thread | ||||||||
□M20*1.5 External thread | ||||||||
□1/2NPT External thread | ||||||||
Shell Type |
Aluminum alloy |
□1/2NPT | ||||||
□M20*1.5 | ||||||||
Stainless steel |
□1/2NPT | |||||||
□M20*1.5 | ||||||||
Display |
□No display |
□LCD Display |
||||||
Explosion-proof |
___________________________ |
Product detail pictures:
Related Product Guide:
We are convinced that with joint endeavours, the small business between us will bring us mutual benefits. We could assure you products quality and competitive selling price for OEM Supply Wireless Pressure Transmitter - JEP-100 Series Pressure Transmitter – , The product will supply to all over the world, such as: New York, Muscat, Italy, With a team of experienced and knowledgeable personnel, our market covers South America, the USA, the Mid East, and North Africa. Many customers have become our friends after good cooperation with us. If you have the requirement for any of our products, please contact us now. We are looking forward to hearing from you soon.
By Sandra from Thailand - 2018.07.26 16:51
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Austin Helman from Angola - 2017.08.21 14:13